This Is The Default Mode When You Power On Your Camera; Taking Photos - Vivitar VIVICAM 8025 User Manual

Camera Mode

This is the default mode when you power on your camera.

Taking Photos

1. Compose your shot using the LCD screen.
2. Hold the camera steady and press the shutter button to take the photo.
3. There will be a short delay while the camera saves the photo to memory.
After each photo is shot (when the camera returns to icon mode) the numbers of photos left to shoot at the
selected resolution is displayed on the top right of the LCD screen.
When the camera's memory (photo capacity) is full, the LCD screen will display a message - "Memory Full,
Insert a SD memory card to Transfer and Take More Photos!"
Either download the photo to your computer using the Vivitar Experience Image Manager software as
described below in the section "Transfer photos and videos to your computer" or insert another SD card to
continue taking more photos and videos.
Finger Touch Screen feature
Your digital camera supports a touch screen feature for convenient and quick operation. Merely use your finger
to touch the relevant parts of the screen in order to activate the corresponding functions. The touch areas on
the LCD screen are displayed below:
10