Selecting The Spin Speed; Selecting Options - Zanussi ZWP 580 User Manual

Selecting the spin speed

Press the "Spin"
to change the spin speed, if you
want your washing to be spun at
a different speed to the one
selected by the appliance. You
can also select "No spin"
hold" * or "Night silence
plus"*.
The maximum speeds are :
Cottons, Eco, Synthetics, Easy
iron, Handwash, Wool, Sport :
850 rpm,
Delicates : 700 rpm.
At the end of the programme, if you have selec-
ted "Rinse hold" or "Night silence plus", you
then need to select a "Spin"
programme to finish the cycle.
"Rinse hold"
The washing machine will not drain the water
from the last rinse, so will not crease the laundry.

Selecting options

You must select the dif-
ferent
selecting
gramme
pressing
Pause"
(see
table").
Press the desired button(s) ; the corresponding
lights come on. If pressed again, the lights go
out. If one of the options is not compatible with
the selected programme, the "Start/Pause"
pushbutton flashes red..
*depending on model
10
"Prewash" option
The appliance runs a prewash at 30°C max. The
pushbutton
prewash finishes with a short spin cycle for cot-
ton or synthetic programmes, and with an empty
cycle for delicates programmes.
"Quick" option
*
, "Rinse
The washing time will be reduced depending of
the selected programme.
"Rinse plus" option
The washing machine will add one or more rin-
ses during the cycle.
This option is recommended for people with sen-
sitive skin and in soft water areas.
or "Drain" Temporary :
Press the "Rinse plus"
option is only active for the selected programme.
Permanent :
Hold down the "Option"
pushbuttons for a few seconds. The option is
permanently activated, even if the appliance is
switched off..
To deactivate it, repeat the process.
options after
the pro-
"Delay start"
and before
the "Start/
pushbutton
"Programme
This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by pressing
the "Delay start"
You can change or cancel the delayed start time
at any time before you press the "Start/Pause"
pushbutton, by pressing the "Delay start"
pushbutton again (when all indicators are off, the
wash programme will start immediately).
If you have already pressed the "Start/Pause"
pushbutton and you want to change or can-
cel the delayed start, proceed as follows :
pushbutton. The
and "Rinse plus"
pushbutton.