Wiring With Naked Cables - Toa F-2322CU2 Instruction Manual

6.2. Wiring with Naked Cables

Choke bracket
Retighten the screw to fix
the speaker cable.
Loosen the screw to allow the speaker cable to pass through.
Plug the wired input connector into the speaker's socket,
then pull the speaker cable from the choke bracket.
(For wiring the input connector, refer to p. 10.)
Connector cover
After completing the speaker cable connection, turn the connector cover
in the direction indicated by the arrow, and fix the cover with 2 screws.
Note
Ensure that the speaker cable is securely fixed.
9