Mounting Hardware Installation - Toa F-2322CU2 Instruction Manual

5. MOUNTING HARDWARE INSTALLATION

Before mounting the speaker, check the ceiling structure is of drop ceiling with 2-foot standard ceiling tiles.
[Installation view on Drop Ceilings]
Caution
Set the tile bridge so that both ends fit securely into the T-grids, even if the ceiling tile accidentally falls off.
Tile bridge (accessory)
T-grid Ceiling tile
[Installation procedures]
7
Step 1. Cut a ø200 mm (7 / ") hole in the ceiling.
8
Use the supplied paper pattern to position and trace the hole.
ø200 ±5 mm (7 / ± / ")
7 13
8 64
Ceiling tile
Step 2. Place the supplied tile bridge on the 2-foot tile as shown below.
Tile bridge (accessory)
2-foot tile
T-grid
6