Optical Media Drives - Toshiba PORTEGE S100 User Manual

The Grand Tour
Floppy disk slot
Eject button
Check the Disk-In-Use indicator when you use the USB floppy disk drive.
Do not press the eject button or turn off the computer while the light is
glowing. Doing so could destroy data and damage the floppy disk or the
drive.
The USB floppy disk drive should be placed on a flat, horizontal surface
when in use. Do not set the drive on an incline greater than 20
is operating.
Do not set anything on top of the floppy disk drive.

Optical media drives

One of the following optical media drives is installed in the computer:
DVD-ROM&CD-R/RW and DVD Super Multi drives. An ATAPI interface
controller is used for CD/DVD-ROM operation. When the computer is
accessing a CD/DVD, an indicator on the drive glows.
For information on loading and unloading discs refer to the
media drives
Region codes for DVD drives and media
DVD-ROM&CD-R/RW, DVD Super Multi drives and media are
manufactured according to the specifications of six marketing regions.
When you purchase DVD-Video, make sure it matches your drive,
otherwise it will not play properly.
Code
2-12
section in Chapter 4, Operating Basics.
Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America,
South America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China
Insert a floppy disk in this slot.
When a floppy disk is fully seated in the drive,
the eject button pops out. To remove a floppy
disk, push in the eject button and the floppy disk
pops out partially for removal.
o while it
Using optical
User's Manual