TEC FS-3600 Owner's Manual page 107

FS-3600 PC Work Station
Clicking on Edit will switch you to the Table View for each Printer.
Field Name
ID
• This is a unique name assigned to the printer. A
Desc
• This field contains more detailed information
Init • This control code is used to initialize the printer.
Clear • This control code is used to clear the printer's
Normal
• This control code is used to cancel condensed,
Expanded • This control code is used to set the printer to
Bar Code
• This control code is used to print bar codes at
• Bar codes are used to quickly recall orders at a
Cut
• Some printers are equipped with a cutter bar.
• This control code initiates the cutter bar to either
Highlight • Some printers are equipped with the ability to
• This control code is used to activate this mode
Description
manufacturer name or model number is usually
sufficient.
about the printer hardware.
buffer.
expanded, and highlight print.
doublewide mode.
the top of guest checks.
cashier station.
a full or partial cut, depending on the control
code and the hardware.
print in either red or reverse print.
in printers able to perform the function.
- 97 -
POS Configuration
Entry Type
Up to 10 Digit
Alpha/Numeric
Up to 18 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric
Up to 30 Digit
Alpha/Numeric