Table of Contents
Advertisement
■
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes trains, or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.
Drag'n Drop CD+DVD
Note the following limitations when you use Drag'n Drop CD+DVD:
■
DVD-Video cannot be created using Drag'n Drop CD+DVD.
■
DVD-Audio cannot be created using Drag'n Drop CD+DVD.
■
You cannot use Drag'n Drop CD+DVD's music CD function to record
music to a DVD-R/-RW disc.
■
Do not use the DISC Backup function of Drag'n Drop CD+DVD to
copy DVD-Video and DVD-ROM with copyright protection.
■
DVD-RAM disc cannot be backed up with the DISC Backup function
of Drag'n Drop CD+DVD.
■
You cannot backup a CD-ROM or CD-R/-RW to DVD-R/-RW using the
DISC Backup function of Drag'n Drop CD+DVD.
■
You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW to
CD-R/-RW using the DISC Backup function of Drag'n Drop CD+DVD.
■
Drag'n Drop CD+DVD cannot record in packet format.
■
You might not be able to use the DISC backup function of Drag'n Drop
CD+DVD to back up a DVD-R/-RW disc that was made with other
software on a different DVD-R/-RW recorder.
■
If you add data to a DVD-R disc that you have already recorded to,
you might not be able to read the added data under some
circumstances. It cannot be read in 16-bit operating systems, such as
Windows 98SE and Windows ME. In Windows NT4, you will need
Service Pack 6 or later to read added data. In Windows 2000, you will
need Service Pack 2 or later to read it. Some DVD-ROM and
CD-RW/DVD-ROM drives cannot read added data regardless of the
operating system.
■
Drag'n Drop CD+DVD does not support recording to DVD-RAM discs.
To record to a DVD-RAM, use Explorer or other utility.
■
If you try to back up a DVD disc to a DVD-RW disc that was erased by
the Quick erase option, you might get an error message. Use the Full
erase option to clear the DVD-RW disc and try again.
■
When you back up a DVD disc, be sure the source drive supports
recording to DVD-R/-RW discs. If the source drive does not support
recording to DVD-R/-RW discs, it might not be backed up correctly.
Portégé A100
Operating Basics
4-8
Advertisement
Table of Contents
