Table of Contents
Advertisement
7. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
1. When you move the keyboard forward, do not touch the keys. Doing
so could cause misalignment. Hold the keyboard by the sides and lay
it gently on the palm rest.
2. The keyboard is connected to the computer by a ribbon cable. Be
careful not to apply tension to this cable when you lift up the
keyboard. Do not try to disconnect this cable.
8. Raise the insulation sheet covering the memory module to appear
the module. And keep the insulation sheet raised using adhesive
tape.
I
NSULATION SHEET
9. Insert a new module to the socket and push it downward to lie flat.
Latches on eitherside will click into place to secure the module.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems
The slot A is reserved for main memory. Use the slot B for expanded
memory. If only one card is installed, use the slot A.
Portégé A100
Removing two screws
Raising the insulation sheet
Optional Devices
8-7
Advertisement
Table of Contents
