Toshiba Portege A 100 User Manual page 104

LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Built-in LAN
Enabled
Disabled
Button Setting
Power Button Lamp
This drop-down menu enables you to specify how the Power button lamp
glows depending on the status of your computer.
[Off]
[Mode 1]
[Mode 2]
[Mode 3]
That when you remove both the AC adaptor and the Battery pack, Mode
1 (default) is automatically selected. However, the setting will return to the
mode you has selected when you power your computer on.
Portégé A100
Enables Wake-up on LAN.
Disables Wake-up on LAN. (Default)
Enables built-in LAN functions. (Default)
Disables built-in LAN functions.
Always off
Sets Mode1 Glows blue (Power on), Glows
yellow (Standby), Glows orange (Power
off/Hibernation). (Default)
Sets Mode2 Glows blue (Power on), Alternately
flashes green and orange (Standby), Alternately
flashes green and blue (Power off/Hibernation).
Sets Mode3 Changes in order of green, orange
and blue (Power on), Glows yellow (Standby),
Glows orange (Power off/Hibernation).
HW Setup and Passwords
7-8