Auto Power On
This option lets you set a time and date for automatic power on and lets
you enable or disable the ring indicator feature. This feature lets the
computer's power be turned on automatically when a call comes in from a
remote modem. Ring Indicator is displayed only when the computer is
in Resume (Suspend or Standby) mode and Alarm Date Option is
displayed only when Alarm Time is enabled.
Alarm Time
Alarm Date Option
Ring Indicator
Wake-up on LAN
Alarm Time is set in the sequence of hours and minutes. Seconds cannot
be changed. Alarm Date Option is set in the sequence of month and
day. If Alarm Date is set to Disabled, the computer will be powered on once
when the set time is reached. Press ↓ to move the cursor to the right and
↑ to move the cursor to the left when you set the time.
Wake-up on LAN lets the computer's power be turned on automatically
when a wakeup signal comes in from a LAN.
Alarm Volume
This option disables or sets the volume level of the alarm. Setting this
option to off disables the computer's sound function for alarms. This option
can also be set with hotkeys.
Off
Low
Medium
High
When Alarm Volume is selected, the subwindow below is displayed to let
you enable or disable certain functions.
Low Battery Alarm
Panel Close Alarm
System Beep
Use this feature to enable or disable the system beep.
User's Manual
OPTIONS
=
00:00:00
=
Disabled
=
Disabled
=
Disabled
Disables alarm
Sets the alarm volume to low
Sets the alarm volume to medium
Sets the alarm volume to high (Default)
ALARM VOLUME OPTIONS
=
Enabled
=
Enabled
Setup and Password Security 7-11