Toshiba Portege 7200CTe User Manual page 69

Fn
Power up mode: Pressing Fn + F3 changes the power up mode. When
you press these hotkeys, the current setting will be displayed in a window.
If you use Windows 95/NT, you can use the System window of Power
Mode Setup in Power Saver. In a Windows 98/2000 environment, use the
When I press the power button feature of System Power Mode window in
Power Saver. In Windows 98/2000, this function changes the power up
mode only when you start the computer by pressing the power button.
Fn
Alarm volume: Press Fn + F4 to adjust the alarm volume to off, low,
medium or high. The first time you press Fn + F4 the volume is set to off.
Continue holding down Fn and press F4 again to change the setting. A
beep sounds to let you know the current alarm volume. The volume at
power on depends on the latest setting. See Chapter 7,
Password
Fn
Display selection: Pressing Fn + F5 changes the active display device.
As indicated below, the changes depend on the computer's display type,
current setting and whether you have a DVD Network Dock II or
CD Network Dock connected.
No DVD Dock
LCD only
DVD Dock connected
LCD only
The LCD/TV setting can be selected only when the computer is in Different
Refresh Rate mode. Use the display setting feature in Windows to set the
mode.
User's Manual
F3
+
F4
+
Security.
F5
+
LCD/CRT CRT only
LCD/CRT CRT only
(back to LCD only)
LCD/TV TV only
Setup and
(back to LCD only)
The Keyboard 5-5