5.
Slide your fingernail or a thin object under the cover and lift it off.
6.
Insert the module's connectors into the computer's connectors at about
a 45 degree angle and press the module carefully to ensure a firm
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7.
Push the raised edge of the module down so it lies flat. Two latches on
either side will clamp against notches on the side of the module to
secure it.
8.
Seat the cover and secure it with the screw.
9.
Replace the battery pack as described in Chapter 6,
Up
10.
Turn the power on and make sure the added memory is recognised.
11.
Clear Hibernation files. Refer to the section Clearing Hibernation files.
User's Manual
Removing the memory module socket cover
Seating the memory module
Modes.
Power and Power-
Optional Devices 8-5