Lcd Display Stretch; Power On Display - Toshiba Portege 7200CTe User Manual

Power on Boot Select
The options are Enabled and Disabled.
Enabled
Disabled
Display
This group of options lets you configure the computer's display.

Power On Display

Lets you set the display to be used when the computer is booted.
Auto-Selected
Simultaneous
You cannot select TV display in Hardware Setup or TSETUP. To display on
a TV screen use hot keys Fn + F5. Refer to Chapter 5,
(Only when an optional DVD Dock II is connected in the computer.)

LCD Display Stretch

The options are Enabled and Disabled.
Enabled
Disabled
TV Config.
This option allows you to select the type of TV.
Type
It appears only when an optional DVD Dock II is connected in the computer.
Others
Whether or not you need to configure the computer with these options
depends primarily on the kind of software or peripherals you use.
Power-up Mode
This option lets you choose between Resume and Boot mode.
User's Manual
Enables the Power on boot mode. (Default)
Disables the Power on boot mode.
selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
selects both the internal LCD and external
monitor for simultaneous display.
Enabling this feature increases the display area
of the screen.
Disabling this feature. (Default)
NTSC (National Television System Committee)
PAL (Phase alternation line)
The Keyboard.
Setup and Password Security 7-9