Toshiba Portege 7200CTe User Manual page 84

Entering Resume (Suspend or Standby)
To enter Resume (Suspend or Standby), follow the steps below.
1. Save your data to the hard disk or to a diskette.
2. Check the Disk indicator to make sure all disk activity has stopped.
Turning off the computer while it is accessing a disk could damage the
disk, the drive or lose data.
3. Turn off the computer. Make sure the Power indicator is out.
4. Turn off the power to any peripheral devices connected to the
computer.
Do not turn the computer back on right away. Wait a few seconds.
Notes and precautions
Resume (Standby/Suspend) will not function if:
Power is turned back on immediately after shutting down
Memory circuits are exposed to static electricity or electrical noise
Power to the memory is cut off. That is if the computer's batteries lose
all power or the battery pack is removed while the computer is not
connected to an AC power source.
If Suspend/Resume fails, the following message will be displayed when
you turn the power back on:
Press any key to restart the system. The computer reinitialises RAM and
resets all soft keys.
6-12 Power and Power-Up Modes
WARNING: RESUME FAILURE.
PRESS ANY KEY TO CONTINUE.
User's Manual