Removing An Sd Card - Fujitsu STYLISTIC Q572 User Manual

I
NSTALLING OR REMOVING AN
STYLISTIC T
YOUR
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD
STYLISTIC T
YOUR
See your specific card manual for instructions on the installation of your card. Some cards may require that your
1
Tablet PC is off while installing them.
Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
2
With the product label facing in the same direction as the display screen, insert your card into the slot.
3
Push the card firmly into the slot until it is seated in the connector.
4

Removing an SD Card

To remove an SD Card, follow these easy steps:
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD
S
BE IN LEEP
Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].
1
Push the SD Card in until it unlatches. It will then eject from the slot for removal.
2
SD C
ARD DURING YOUR
PC.
ABLET
PC, .
ABLET OR BOTH
M O
ODE OR FF WHILE REMOVING THEM
STYLISTIC T PC'
ABLET S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND
.
53 - Secure Digital Cards
. S
OME CARDS MAY REQUIRE YOUR
/
OR
,
STYLISTIC T PC
ABLET TO