SENDO X User Manual page 46

2
Note: The actual invoice for calls and services
from your service provider may vary, depending
upon network features, rounding-off for billing,
etc.
!
To reset the call costs counter
1. Open the Call costs
2. Press Options
3. You will be prompted to enter the phone's PIN2
code. See
details.
4. Press Ok
Setting a call cost limit
This feature enables you to set a maximum limit for
your outgoing call costs which cannot be exceeded.
If your accumulated calls do exceed this cost, you
will not be able to make any further calls (with the
exception of Emergency calls) until the call cost
counter is reset, or the call cost limit is changed or
switched off.
See Log settings
GPRS data counter
This allows you to check the amount of data (in
kilobytes) sent and received during packet data
(GPRS) connections.
Note: This service may not be available on your
phone. Contact your service provider if you are
unsure.
feature.
and select Clear
Security settings on Page 47
.
for more information.
!
To view GPRS data counter
1. Open the Log.
2. Scroll to
!
To reset the GPRS data counter
1. Open the
2. Press
counters.
3. You will be prompted to enter the phone's lock
code. See
for
details.
4. Press
Note:
be available on your phone. Contact your
service provider for more information.
Log settings
In the Log
Settings. The following
Select this
Log duration
Show call duration
Show costs in
Call cost limit
40
GPRS counter and press Select
GPRS counter feature.
Options and select
Security settings on Page 47
Ok .
The GPRS counter reset feature may not
feature, press Options
Log settings are available:
To
Set the length of time which log
information is stored for: 0, 1, 10, or
30 days. After this time, details are
erased in order to free memory.
Enable/disable the current duration of
an active call to be displayed on screen.
Select whether call costs are displayed
in units or in currency.
Set a call cost limit which cannot be
exceeded.
.
Clear counters.
for
and select
Sendo X User Guide