Ignoring An Incoming Call; Diverting Incoming Calls - SENDO X User Manual

2
!
To answer an incoming call
• On the Incoming Call screen, press
Answer
Tip: You can set the phone up so that an
incoming call is answered by pressing any key.
Tip: If the phone is connected to a handsfree or
car kit, you can set the phone up to answer
incoming calls automatically after five seconds.
To activate either of these features, see
on Page 42 for more information.
!
To silence an incoming call
• On the Incoming Call screen, press
This will mute the ring tone. The call can then be
answered, rejected, or ignored, as normal.
Tip: If you do not want to be disturbed by your
phone ringing, but you still want to be able to
receive calls, you can change the phone's active
profile so that the
Silent. Alternatively, press
in the
mode. You may want to do this before a
business meeting, for example. See
Page 51 for more information about changing
the phone's active profile.
!
To reject an incoming call
• On the Incoming Call screen, press
press the right soft key
will silence the ring tone, and the second will
reject the call.
.
Incoming call alert
Options
Now! screen to set the phone to silent
twice. The first press
Note:
you only need to press
Call or
call.
Tip:
automatically connected to your voicemail
service, if you are subscribed to this network
service.
!
To end a call
• Press
Call settings

Ignoring an incoming call

If you choose to ignore an incoming call, details of
Silence .
the call will be stored in the phone's call history Log.
The caller can be automatically connected to your
voicemail service, if you are subscribed to this
network service.

Diverting incoming calls

is set to
You can choose to divert incoming calls to a different
and then
number, for example if your number is busy.
If you have a voicemail service (check with your
service provider), you can forward calls on to your
Profiles on
voice mailbox.
Call diverting can be set up from
phone's call settings. See
Page 50
End or
35
If your Incoming call alert
Reject
If you reject a call, the caller can be
End to disconnect the call.
Call divert settings on
for more information.
is set to Silent,
to reject a
Call divert in the
Sendo X User Guide