Smeg Oven User Manual page 16

4. After a few seconds the
symbols stop flashing. The appliance
waits for the set start time.
5. At the end of the cooking time "cooking
completed" appears on the display and
a buzzer will sound that can be
deactivated by pressing the control
knob.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
18
Use
Modifying the data set during
and
programmed cooking
During operation, it is possible to modify
programmed cooking duration:
1. When the
2. Turn the control knob to alter the
3. Press the control knob again. The
4. Turn the control knob to delay the end of
5. After a few seconds the
After modifying the cooking time,
the end of cooking time must be re-
set.
and
steadily and the appliance is waiting for
cooking to start, press the temperature
knob twice. will start flashing.
previously set cooking time.
symbol switches off and
flashing. The display shows the end of
cooking time.
cooking time.
symbols stop flashing and programmed
cooking restarts its operation with the
new settings.
symbols are lit
starts
and