Field Programming Mode; Memory Storage Into The Book Memory - Vertex Standard Pilot VXA-210 Operating Manual

The VXA-210's Book Memories also allow the user
to store, label, and recall channel frequencies which
you may want to use frequently while the VXA-210
is in the Field Programming mode.

Memory Storage into the Book Memory

r Press and hold the PTT and LAMP switches
while turning the radio on, to activate the Field
Programming Mode.
r Select the desired frequency to be stored in the
Book Memory.
r Press and hold the [ MW ( SPL.W )] key for 2 sec-
onds. The display will indicate "BOOK - " and a
channel number will blink on the LCD.
r W i t h i n f i v e s e c o n d s o f p r e s s i n g t h e
[ MW ( SPL.W )] key, rotate the DIAL selector
knob to select the desired memory channel num-
ber for storage.
r Now press and hold in the [ MW ( SPL.W )] key
for 2 seconds; you will now see " - - - - - - - - " on the
LCD. To attach an alpha/numeric name (label)
to the memory, proceed to the next step; other-
wise press and hold the [ MW ( SPL.W )] key for
2 seconds to save the entry and exit.
VXA-210 P O
ILOT PERATING
F P
IELD ROGRAMMING
r To label a memory with an alpha/numeric name,
r Select succeeding characters in the same man-
r After entering the entire name (eight characters
r Repeat this procedure to store additional frequen-
r Turn the radio off, then turn the radio back on
M
ANUAL
M
ODE
the next step is to use the DIAL selector knob to
select any of the 48 available characters (includ-
ing letters, numbers, and special symbols). When
the desired first character appears, press down
on the DIAL selector knob momentarily to move
on to the next character.
ner, pressing down on the DIAL selector knob
momentarily after each selection.
maximum), press the [ MW ( SPL.W )] key for 2
seconds to save all data for the channel.
cies into the Book Memory section, as desired.
again to begin normal operation.
39