Others Settings - JVC HR-XVC33U Instructions Manual

Playback discs
DVD VIDEO with
48 kHz, 16/20/24 bit linear
PCM
DVD VIDEO with DTS
DVD VIDEO with Dolby
Digital
Audio CD/Video CD
Audio CD with DTS
MP3 disc
NOTES:
The unit is not equipped with the DTS decoding function.
When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.
Never use the unit's analog output connectors, which output incorrect signals that may damage your speakers.
If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or
set the level control of the amplifier connected to the analog outputs to minimum.

Others Settings

8 RESUME
ON
OFF
DISC RESUME
8 ON SCREEN GUIDE
ON
OFF
STREAM/PCM
DTS bitstream
Dolby Digital bitstream
44.1 kHz, 16 bit stereo linear PCM
DTS bitstream
When this function is set to "ON", you can use the resume function.
( pg. 45)
ON:
OFF:
DISC RESUME:
NOTE:
This function is not available for Audio CDs and MP3 discs.
When this function is set to "ON", the unit can display "on-screen
guide" icons or characters which shows the conditions of the unit or
disc.
Output
DOLBY DIGITAL/PCM
48 kHz, 16 bit linear PCM
44.1 kHz, 16 bit stereo linear PCM
44.1 kHz, 16 bit stereo linear PCM
Linear PCM
* The default setting is bold in the table below.
You can start playback from the resume point of the
placed disc.
You cannot use the resume function.
The unit retains a memory of the resume points of
the last 30 discs played back, even though they
have been ejected.
81
EN
PCM ONLY
48 kHz, 16 bit stereo linear
PCM