Solving Bluetooth Problems - Lenovo ThinkPad User Manual

2. Click Start → Control Panel → Bluetooth Devices or Start → Settings → Control Panel → Bluetooth
Devices from the Windows Start menu.
3. Move the power switch on the mouse to ON. Press and hold the Bluetooth connection button for
three seconds. The LED starts to flash.
4. Select the My device is set up and ready to be found checkbox and click Next.
5. Select ThinkPad Bluetooth Laser Mouse from the list and click Next.
6. Select Don't use the passkey and click Next.
7. The installation starts. Click Next.
8. Click Finish to complete the setup procedure. The mouse is now connected and ready for use.
Note: If a window opens indicating the connection fails, select ThinkPad Bluetooth Laser Mouse icon
and click Remove. Then click Search and continue with Step 5.

Solving Bluetooth problems

This section provides basic troubleshooting information when you encounter problems with your mouse.
The ThinkPad Bluetooth Laser Mouse is not recognized by your computer.
v Be sure that the Bluetooth radio is turned on and the Bluetooth works.
v Be sure that the Bluetooth connection button is switched to ON.
v Log in to your notebook computer BIOS interface, and set all options related to mouse to default. For
details about the BIOS settings, refer to the User Guide that came with your notebook computer.
v Make sure your notebook computer is compatible with the mouse.
The mouse pointer cannot move.
v Be sure that you have followed all of the setup procedures.
v Uninstall the Mouse Suite Software, restart the computer, and reinstall the software.
v Clean the mouse lens with a soft cotton swab. Do not use any other liquid or solvent to clean the
mouse lens as this might cause damage to the lens.
v Put a mouse pad under the mouse or move the mouse on a neutral-colored surface. If the mouse is
moving on a red or a highly reflective surface, the mouse might not be able to work.
2-4
Lenovo Combined Mouse User Guide