Uninstalling The Widcomm Bluetooth Stack - Lenovo ThinkPad Bluetooth Laser Mouse User Manual

8. Remove the dongle and plug it back in, the mouse will pair automatically. Click Finish to exit
the installation.
The following prompt requires you to restart the computer so that the Bluetooth stack takes
effect. Click Yes to restart your computer now or No to restart later.

3.2 Uninstalling the WIDCOMM Bluetooth Stack

Follow the steps below to uninstall the WIDCOMM Bluetooth stack from your computer.
1. Remove the USB Bluetooth dongle.
2. Click Start > Settings > Control Panel > Add/Remove
Programs.
3. Select WIDCOMM Bluetooth Software from the program list and click Remove.
4. The system starts to remove the program, it may take some time to uninstall.
5. When the program has been removed, a prompt requires you to restart the computer. Click Yes
to restart your computer now or No to restart later.
4. Setting up the Laser Mouse
4.1 Quick Pairing in Windows
The Bluetooth mouse has been set to a pre-pairing mode as the factory default. For quick pairing, enable the
pre-pairing mode following the steps below.
1. Plug the USB Bluetooth dongle into a USB port of your computer.
2. For the mouse, press the pairing button at its bottom.
Pairing button