Table of Contents
Advertisement
RECORDING
Set REC MODE, S-VHS (S-VHS ET), TAPE
LENGTH and DATE/TIME in SYSTEM MENU.
(
pg. 18 – 21, "MENU SETTINGS")
1
Remove the lens cap. Set the Power Switch
to "
" or "
".
Shooting while using the viewfinder: Make sure
the LCD monitor is closed and locked.
Shooting while using the LCD monitor: Make
sure the LCD monitor is fully open.
)
The camcorder enters the Record-Standby mode
and "PAUSE"
is displayed.
• If you tilt the LCD monitor upward to 180 degrees,
the viewfinder switches back on and the
monitored image can be viewed both on the LCD
monitor and in the viewfinder, so the person you
shoot can view himself/herself.
2
Press the Recording Start/Stop Button
appears while recording is in progress.
!
• To stop recording, press the Recording Start/Stop
Button
. The camcorder re-enters the Record-
Standby mode.
To Adjust The Brightness Of The LCD Monitor,
rotate the BRIGHT Wheel
#
indiator
on the display moves and the
appropriate brightness is reached.
• Tapes recorded on S-VHS or S-VHS ET
(
pg. 18, 20) cannot be played back correctly
on a normal VHS VCR.
To playback on a regular VHS VCR, use a VHS
tape and select S-VHS ET (OFF) in SYSTEM
MENU (
pg. 18, 20).
!
.
1
until the bright level
PLAYBACK
1
Load a tape (
Cassette").
2
Set the Power Switch
@
playback, press 4/6
To stop playback temporarily (Still Playback), press
^
s
%
or
. To stop playback, press 5
4/6
to rewind, or 3
2
High-speed picture search (Shuttle Search) is
possible by pressing 2
playback (holding 2
playback continues search until released). To
resume normal playback, press 4/6
For VIDEO RECORDING/VIDEO PLAYBACK
• The camcorder shuts off automatically after about
5 minutes in the Record-Standby or Stop mode.
To turn on again, set the Power Switch
7
"OFF", then to "
• When the Power Switch
"
" and the LCD monitor* is opened at an
angle of 60 degrees or more, the LCD monitor
switches on and the viewfinder switches off
automatically to save power.
• The playback picture can be viewed in the
viewfinder (with the LCD monitor shut), on the
LCD monitor or on a connected TV (
"Connections To A TV/VCR").
• To remove the indications,
OSD OUTPUT in SYSTEM MENU.
• To control the speaker volume, slide VOL.
towards "+" to turn up, or towards "–" to turn
down. While shooting, sound is not heard from
the speaker.
• If TBC (
pg. 14) is engaged during Still
Playback, noise bars will not appear.
11
pg. 8, "Loading/Unloading A
@
^
T
to "
". To start
or
.
&
to fast-forward the tape.
%
&
%
&
or 3
during
or 3
down during
^
or
", "
" or "
@
".
is set to "
pg. 21, DISPLAY or
$
. Press
T
.
@
to
", "
" or
pg. 15,
3
Hide quick links:
Advertisement
Table of Contents
