JVC GR-AX970 Instructions Manual

JVC GR-AX970 Instructions Manual

Compact vhs camcorder

Advertisement

INSTRUCTIONS
COMPACT VHS CAMCORDER
GR-SXM740
GR-SXM340
GR-SXM240
GR-AX970
For Customer Use:
Enter below the Model No. and Serial No. which is
located on the bottom of the camcorder. Retain this
information for future reference.
Model No.
Serial No.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
"PRECAUTIONS" (
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
• Available when the Power Switch
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• "DEMO MODE" remains "ON" even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
while the demo is in progress. This takes you directly to the demo mode's Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
pg. 3, 4) to ensure safe use of this product.

AUTOMATIC DEMONSTRATION

@
is set to "
ENGLISH
S-VHS is compatible with
GR-SXM740/SXM540/
SXM340/SXM240 only
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD
" or "
".
@
to "
" and press the MENU Wheel
1
Printed in Malaysia
U
1101MKV
1
to select "OFF" and press it.
LYT0880-001C
*
UN
*
PJ
1
in

Advertisement

Table of Contents
loading

Summary of Contents for JVC GR-AX970

  • Page 1: Automatic Demonstration

    Model No. Serial No. Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “PRECAUTIONS” ( pg. 3, 4) to ensure safe use of this product. Automatic Demonstration takes place when “DEMO MODE” is set to “ON”...
  • Page 2 • Shoulder Strap NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
  • Page 3: Safety Precautions

    However, live recording and LCD monitor*/viewfinder playback are possible anywhere. • Use the JVC BN-V11U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter.
  • Page 4: Important Safety Instructions

    Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.
  • Page 5 Charge Marker ... pg. 6 Charging The Battery Pack ... pg. 6 Classic Film Effect ... pg. 23 Clean The Camcorder ... pg. 27 Connection To a VCR/TV ... pg. 15 Connection To A PC ... pg. 16 Counter Memory ... pg. 14 Darken The Image ...
  • Page 6: Getting Started

    AC range from 110 V to 240 V. Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction. REFRESH: Be sure to fully discharge a battery pack before recharging or storing it for a long period of time, otherwise the battery performance will be reduced.
  • Page 7 TV, see DATE/TIME DISP. ( • The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an authorized JVC dealer for replacement, or set the date/time as necessary before you start shooting. to “ ”.
  • Page 8 If the tab has been removed, cover the hole with adhesive tape. • The cassette holder cannot be opened while the PAUSE camcorder is in the record mode or detached from the power source. * Applicable models only. Cassette holder...
  • Page 9 – – – – – – – Refer to this diagram while reading the instructions. During shooting Keep the lens cap attached to the camcorder. LCD monitor (applicable models only) LCD Monitor/Viewfinder Indications & ^ – – – – –...
  • Page 10 • MENU Wheel [–, +] ... • BRIGHT Wheel [–, +]* • TRACKING Wheel [–, +] ... • Snapshot Button [SNAPSHOT]* • 5-Second Recording Button [5 SEC. REC]* • Power Zoom Lever [T/W] ... • Speaker Volume Control [VOL.]* • Picture Stabilizer Button [P.STABILIZER] ...
  • Page 11 BRIGHT Wheel indiator on the display moves and the appropriate brightness is reached. • If you are using the GR-AX970, it is also possible to adjust the brightness of the viewfinder by adjusting as described above. * Applicable models only.
  • Page 12: Basic Features

    2) During Record–Standby, press 5SEC. REC 3) Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record– Standby mode automatically. 4) To cancel the 5Sec. Rec. function, press 5SEC. • Fade/Wipe ( pressing 5SEC.
  • Page 13 • Do not use near flammable or explosive moves during materials. • It is recommended that you consult your nearest JVC dealer for replacing the video light. Quick Review To check the end of the last recording. 1) Make sure the camcorder is in the Record–...
  • Page 14 “OFF” and then “ blinks. When Auto Tracking finishes, the indication disappears. • When noise bars appear during playback, the camcorder enters the Auto Tracking mode and “AT” appears. • Manual Tracking may not work with tapes recorded on other VCRs or camcorders.
  • Page 15 SXM240 only). • For GR-SXM740/SXM340 Owners: The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder.
  • Page 16 Battery Cover Connection To A Personal Computer (GR-SXM740/SXM340 only) You can transfer image data from the camcorder to a PC using Digital Photo Navigator. When connecting to your PC, refer to the instruction manuals of the PC and Setup Guide for the provided software.
  • Page 17 During Recording – – – – – – Refer to this diagram while reading the instructions. During shooting Keep the lens cap attached to the camcorder. LCD monitor (applicable models only) LCD Monitor/Viewfinder Indications – & ^ – – – –...
  • Page 18: Menu Settings

    NEXT” focusing is not possible. • When shooting a subject close to the lens, zoom out first ( the auto focus mode, the camcorder could automatically zoom out depending on the distance between the camcorder and the subject. MENU This does not occur with “TELE MACRO”...
  • Page 19 OFF is selected. DATE/TIME DISP. Makes the date/time appear in the camcorder or on a connected monitor (set DATE/TIME in SYSTEM MENU first • The selected display will be recorded. If you do not want to record the display, select OFF before shooting.
  • Page 20: System Menu

    Technology). S-VHS REC appears during recording. OFF: Records in VHS on a VHS or S-VHS cassette. • JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.
  • Page 21 INT. TIME You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time (Time-Lapse). REC MODE should be set to “SP”.
  • Page 22: Advanced Features

    “AUTO” or “ON” ( “Video Light”). • During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended. Fade/Wipe Effects Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end.
  • Page 23 Program AE With Special Effects 1) Set the Power Switch to “ 2) Press P.AE repeatedly until the desired mode appears. • To cancel the effect, press P.AE until “OFF” appears. • Only one mode can be engaged at a time. •...
  • Page 24: Troubleshooting

    Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself. Vertical white lines appear when shooting a very bright object. • This sometimes occurs when the contrast between the back-ground and the object is great. It is not a defect of the camcorder.
  • Page 25: Warning Indications

    If an error indication and warning appear, turn the unit off, remove the power supply (battery, etc.) and wait a few minutes for them to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
  • Page 26 • When operating, keep a distance of about 30 cm (11-13/16”) between the video light and people or object. • Do not use near flammable or explosive materials. • It is recommended that you consult your nearest JVC dealer for replacing the video light. General Battery Precautions If the remote control or cassette adapter is not functioning even if it is being operated correctly, the batteries are exhausted.
  • Page 27 This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.
  • Page 28: Specifications

    • Compact S-VHS ( • Compact VHS ( • Active Carrying Bag CB-V7U Some accessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability. : Electronic viewfinder with 0.55" color LCD (GR-AX970 only) Electronic viewfinder with 0.5"...
  • Page 29 Al jack de Cuando emplee modelos equipados con monitores entrada de CC (DC IN) Cuando utilice GR-AX970 ( ): cuando el foco de video está encendido USO DE LA ALIMENTACIÓN DE CA Conecte el adaptador de CA en la cámara de video pasos 2) y 3) de “CARGA DE LA BATERÍA”).
  • Page 30 • Durante la carga o descarga, la cámara de video no puede ser operada. • No es posible efectuar la carga o descarga si se utiliza un tipo de batería equivocado. • Cuando efectúe la carga de la batería por primera vez o después de un largo periodo de almacenamiento, la lámpara CHARGE no se encender.
  • Page 31 ESPAÑOL — GUIA PARA OPERACION RAPIDA Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC. Colocación/Extracción de un cassette 1) Abra completamente el monitor LCD*. Deslice EJECT hasta que el compartimiento de cassete se abra.
  • Page 32 REPRODUCCIÓN 1) Cargue una cinta. 2) Ajuste el conmutador de alimentación . Para iniciar la reproducción, presione 4/6 Para interrumpir momentáneamente (reproducción de imágenes fijas), presione 4/6 . Para interrumpir la reproducción, presione 5 . Presione 2 & para avanzar rápido la cinta. La búsqueda de imagen a alta velocidad (Búsqueda rápida) es posible presionando 2 &...

Table of Contents