Smeg Oven Instructions For Use Manual page 39

Instructions for the installer
POSSIBLE
CONNECTION TYPES
380 - 415 V
380 - 415 V
220 - 240 V
• Use H05V2V2-F cables withstanding temperatures of 90°C or higher.
• The values indicated above refer to the cross-section of the internal
conductor.
• The tightening torque of the screws of the terminal supply wires must be 1.5
- 2 Nm.
The aforementioned power cables are sized taking into account the coincidence
factor (in compliance with standard EN 60335-2-6).
11.3 Positioning the skirt
WARNING: The skirt provided is an integral part of the product; it must be
fastened to the appliance prior to installation.
• Position the skirt above the top, taking care
to align holes A with holes B.
• Secure the skirt to the top by tightening
screws C.
3N~ 5-pole
2N~ 4-pole
1N~ 3-pole
CABLE TYPE
(if not present)
5 x 2.5 mm²
4 x 4 mm²
3 x 6 mm²
H05V2V2-F
H05V2V2-F
H05V2V2-F
81