Setting The Time, Time Zone And Date; Update The Software Of The Device; Selecting The Menu Language - Grundig Cosmopolit 3M WEB User Manual

SPECIAL SETTINGS
Setting the time, time zone and
date manually
1
Open the »Main menu« by pressing »MENU«.
2 Press » « or » « or turn the Jog-Shuttle to se-
lect the »Set-up« option and confirm by press-
ing »OK«.
3 Press » « or » « or turn the Jog-Shuttle to se-
lect the »Time« option and confirm by pressing
»OK«.
4
Press » « or » « or turn the Jog-Shuttle to se-
lect the »24/12 hour« option and press »OK«
to confirm.
5
Press » « or » « or turn the Jog-Shuttle to
select the »AM/PM« or »24 h« options and
press »OK« to confirm.
6 Press » « or » « or turn the Jog-Shuttle to se-
lect the »Manual« option and confirm by press-
ing »OK«.
– Time menu opens again.
Set time
Time/Date
00 : 00
11:17
– Display: Up/down arrows and digits for the
hours appear.
7
Press » « or » « or turn the Jog-Shuttle to set
the hours and press »OK« to confirm.
– Display: the arrows move right to the digits
of minutes.
8 Press » « or » « or turn the Jog-Shuttle to set
the minutes and press »OK« to confirm.
– Display: the previous menu comes back au-
tomatically and the time is shown on the left
corner at the bottom of the display.
9
Press »MENU« to end the setting.
-----------------------------------------------------------------------------------------------------
Update the software of the
device
This function enables you to use the device with
the latest software.
1
Open the main menu by pressing »MENU«.
2 Press » « or » « or turn the Jog-Shuttle to
select the »Set-up« option and press »OK« to
confirm.
3 Press » « or » « or turn the Jog-Shuttle to se-
lect the »Update software« option and press
»OK« to confirm.
– Display: »Firmware is up to date«, if no new
software is available;
or
»To upgrade the Liveradio ...«, if new
software is available and then the serial
number of the software and its date appear
on display.
4
Start the software update by pressing »OK«;
or
press »MENU« to end setting. Press » « to
select the previous menu.

Selecting the menu language

If you want to change the menu language after
the first setup, open the »Main menu« by press-
ing »MENU«.
1
Open the »Main menu« by pressing »MENU«.
2 Press » « or » « or turn the Jog-Shuttle to
select the »Set-up« option and press »OK« to
confirm.
3 Press » « or » « or turn the Jog-Shuttle to se-
lect the »Language« option and press »OK« to
confirm.
4
Select your language using » « or » « and
press »OK« to confirm.
5
Press »MENU« to end the setting.
65
ENGLISH