Pride Mobility Flash Owner's Manual page 23

V . C O M F O R T
Armrest Height
The armrest height has a 3-in. range of adjustment.
To change the armrest height:
1. Loosen the setscrew on the armrest. See figure 13.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrew to secure the armrest.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 14.
2. Loosen the jam nut.
3. Turn the adjusting screw clockwise to lower the front
of the armrest, or turn the adjusting screw counterclock-
wise to raise the front of the armrest.
4. Tighten the jam nut to lock the adjusting screw into place.
Foot Platform Height
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform bracket.
See figure 15.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the hardware into the foot platform bracket
and tighten.
Foot Platform Angle
You can adjust the angle of the foot platform with a hex
key. See figure 15.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew.
2. Turn the setscrew counterclockwise to raise the front of
the foot platform.
3. Turn the setscrew clockwise to lower the front of the
foot platform.
Flash/RevC/Jan04
A D J U S T M E N T S
SETSCREW
ARMREST KNOB
Figure 13. Seat and Armrest Adjustments
ARMREST ANGLE
ADJUSTING
SCREW
JAM NUT
Figure 14. Armrest Angle Adjustment
FOOT PLATFORM
HARDWARE
Figure 15. Foot Platform Adjustment
www.pridemobility.com
SEATBACK
RELEASE LEVER
SETSCREW
23