Operations After Setting The Timer - Sharp SD-AS10H Operation Manual

Operations after setting the timer

SD-AS10H
ENGLISH
1
After setting the timer
" When the timer is set, the timer set indicator lights up.
" If the timer set indicator does not light up, set the timer again.
2
At the start time
The volume will increase gradually until it reaches the preset volume.
3
When the end time is reached
The unit is set to the power stand-by mode automatically.
E-55
! Checking the timer setting
1 Press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the
TIMER", and press the ENTER button.
3 Within 10 seconds, press the
CALL", and press the ENTER button.
Lights up
The unit returns to the timer stand-by mode after displaying the settings in order.
! Cancelling the timer setting
1 Press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the
TIMER", and press the ENTER button.
3 Within 10 seconds, press the
and press the ENTER button.
Timer will be cancelled (the setting will be retained).
! Changing the timer setting
Perform steps 1 - 10 on page 54 to set the timer again.
! To use the same timer setting
Once timer:
1 Turn on the unit, and press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the
the ENTER button.
Flashes
3 Within 10 seconds, press the
ENTER button.
4 Press the ON/STAND-BY button to enter the power stand-by mode.
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer
setting is cancelled. Cancel the daily timer when it is not in use.
When you use the same setting for the daily timer, select "DAILY TIMER" instead of
"ONCE TIMER", and select "DAILY ON" instead of "ONCE ON".
05/3/17
or button to select "ONCE TIMER" or "DAILY
or button to select "ONCE CALL" or "DAILY
or button to select "ONCE TIMER" or "DAILY
or button to select "ONCE OFF" or "DAILY OFF",
or button to select "ONCE TIMER", and press
or button to select "ONCE ON", and press the
SD-AS10H_SEEG_E.fm
TINSZA116AWZZ