Enhancing Your System - Sharp CD-XP200H Operation Manual

Enhancing your system

CD-XP200H
ENGLISH
The connection lead is not included. Purchase a commercially available lead as
shown below.
Red White
E-25
! Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
To the line
2
output sockets
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
White Red
4
Play the connected equipment.
Note:
To prevent hum interference, place this unit away from a television.
! To record on a tape
1
RCA lead
Insert a cassette in the TAPE 2 cassette compartment.
(not supplied)
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the
5
Play the VCR, DVD, etc.
! Headphones
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
) button.
/ ( ) button.
02/02/21 CD-XP200H(H)E3.fm