Advanced Cd Or Mp3/Wma Disc Playback - Sharp XL-E100H(BK) Operation Manual

Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the
power is restored.
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Be sure to place 8 cm (3") disc in the middle of the disc
tray.
Due to the structure of the disc information, it takes longer
to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast
forward, "END" will appear on the display and CD
operation will be paused. When the beginning of the first
track is reached during fast reverse, the unit will enter the
playback mode (only for CD).
Rewritable multi-session discs with unfinished writing, can
still be played.
Various disc functions
Function Main Remote
unit control
Play
Stop
Pause
Track
up/down
Fast
forward/
reverse
Operation
Press in the stop
mode.
Press in the playback
mode.
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback
or stop mode.
If you press the
button in the stop
mode, press the /
button to start the
desired track.
Press and hold down
in the playback
mode.
Release the button to
resume playback.
E-8
Advanced CD or MP3/WMA disc
playback
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
The numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the "10+" button.
A. For example, to choose 13
1
Press the "10+" button once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the "10+" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes:
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until "Repeat One"
appears. Press the / (CD/USB
To repeat all tracks:
Press the PLAY MODE button repeatedly until "Repeat All"
appears. Press the / (CD/USB
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on page 9
and then press the PLAY MODE button repeatedly until
"Repeat All" appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until "Normal"
appears and " " disappears.
RRMCGA22 RRMCGA226AWSA
Selected track number
/ ) button.
/ ) button.