Advanced Cd Or Mp3/Wma Disc Playback - Sharp QT-MP5W Operation Manual

Advanced CD or MP3/WMA disc playback

Repeat play and Random play
All tracks or a programmed sequence can be continuously repeated.
The track on the disc can be played in random order automatically.
1
Whilst a disc is stop or playing,
press the REPEAT button to Re-
peat 1.
2
Each time the button is pressed, the repeat play mode
changes in the following order.
The repeat play mode changes as follows on CD.
REPEAT 1 REPEAT ALL
1
CD
The repeat play mode changes as follows on MP3/WMA disc.
REPEAT 1
1
TRACK MP3
NORMAL
TRACK MP3 CD
3
Whilst a disc is stop or playing,
press the RANDOM button to en-
ter random play mode. To cancel
random playback, press the but-
ton again.
REPEAT
NORMAL
CD CD
REPEAT ALL
TRACK MP3 CD
REPEAT FOLDER
FOLDER
TRACK MP3 CD
RANDOM
RANDOM
CD
Notes:
If you press the button during random play, you can move
to the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previ-
ous track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the STOP
button. Otherwise, the disc will play continuously.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to 32
characters.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Time display cannot be changed by the MEMORY/DISP button.
Title name and artist name can be displayed by pressing the
MEMORY/DISP button during file playback or pause mode.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
QT-MP5W
10