System Connections - Sharp XL-E100H(BK) Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
AM loop
Right
speaker
FM
aerial
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
Speaker connection
Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
Do not mistake the right and the
left channels. The right speaker is
the one on the right side when you
face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
Do not stand or sit on the speakers. You may be
injured.
Installing the AM loop aerial
aerial
< Assembling >
wall
screws (not supplied)
Incorrect
< Attaching
to the wall >
Demonstration mode
The first time the unit is plugged in, the unit will enter
the demonstration mode.
To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power stand-
by mode. The unit will enter the low power consumption
mode.
To return to the demonstration mode, press the DEMO/
DIMMER button again.
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
E-4
Left
speaker
Red
Black
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)