Av Input (Only Shown In Av Mode); Use Subtitles; Auto 4 : 3 Mode; Reset Default - Sharp LC-19DV200E Operation Manual

TV menu

AV Input (Only shown in AV mode)

It is possible to manually adjust various settings for
connections with external devices. Select the
appropriate signal type for the signals from the video
equipment connected the AV1 or AV2 (
1.
Press TV MENU on your remote control and
select .
2.
Press / to select AV1 Input or AV2 Input.
/
3.
Press to select the desired signal type.
Auto:
RGB (only for AV1 input):
CVBS:
S-Video:

Use subtitles

You can enable subtitles for each TV channel.
Subtitles are broadcasted via teletext or DVB-T digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
E
Set analogue subtitles
1.
Press TV MENU on the remote control and
≥ Subtitle.
select
2.
Press OK or to enter Subtitle.
3.
Select Analog Subtitle.
/
4.
Press to select On to display subtitle
always. Select Off to close subtitles.
5.
Follow the on-screen instructions to exit.
E
Select a subtitle language on digital TV
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the TV menu is temporarily overruled.
1.
Press TV MENU on the remote control and
≥ Subtitle.
select
2.
Press OK or to enter Subtitle.
3.
Press / to select Digital Subtitle Language
or Digital Subtitle Language 2nd.
4.
Highlight your selection and press
select a subtitle language.
5.
Follow the on-screen instructions to exit.
NOTE
• If your selected subtitle language is not broadcasted, the
default language subtitle will be displayed.
54B0101A_English.indd 19 54B0101A_English.indd 19
26" 32"
).
Factory setting, normally OK.
When RGB is input.
When Composite is input.
When S-Video is input.
/
to
• If the Digital Subtitle Language you selected is not
available, the Digital Subtitle Language 2nd will be
displayed.
E
Select Hearing impaired subtitle
When watching channels with hearing impaired
services, you can enable the subtitle commentary for
hearing impaired. For digital channels only.
1.
Press TV MENU on the remote control and
≥ Subtitle.
select
2.
Press OK or to enter Subtitle.
3.
Press to select Hearing Impaired.
/
/
4.
Press to select On or Off as your subtitle
type.
5.
Follow the on-screen instructions to exit.

Auto 4 : 3 Mode

This option selects the default way that a 4:3 signal
is shown - either as normal "4:3" or expanded in the
"16:9" mode, according to your preferences.
1.
Press TV MENU on the remote control and
≥ 4 : 3 Mode.
select
/
2.
Press to select 4 : 3 or 16 : 9.
3.
Follow the on-screen instructions to exit.

Reset Default

When you activate the Reset Default, the TV enters to
first time installation.
1.
Press TV MENU on the remote control and
≥ Reset TV Setting.
select
2.
Press OK or to enter.
3.
Input password (0000: default password).
4.
Follow the on-screen instructions to reset your
TV settings.
19
2/27/2010 17:23:29 2/27/2010 17:23:29