Preparation; Supplied Accessories; Mount The Tv Stand - Sharp LC-19DV200E Operation Manual

Preparation

Supplied accessories

Stand unit and screws
AC cord (x1)
Product shape varies
in some countries
Operation Manual
Operation Manual

Mount the TV stand

Before performing work spread cushioning over
the base area to lay the TV on, making sure the
area is completely flat.
This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC
cord from the AC INPUT terminal.
19" 22"
1.
Confirm the 3 screws supplied with the TV.
Screws (X3)
2.
Remove the covering sheet before use.
1
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 3 screws into the 3
holes on the bottom of the stand.
Screw
54B0101A_English.indd 7 54B0101A_English.indd 7
1.
Remote control (×1)
2.
AA battery (×2)
Quick Setup Guide
Quick Setup Guide
3.
Soft cushion
NOTE
•
•
26" 32"
Confirm the 8 screws supplied with the TV.
Short screws (X4) Long screws (X4)
(used in step 2) (used in step 3)
Remove the covering sheet before use.
Attach the base to the post.
2
Attach the base to the 4 screws into the 4
holes on the bottom of the base.
Hex key
Screw
Insert the stand into the openings on the
bottom of the TV.
2
Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Hex key
Screw
Soft cushion
For protection, sheets are covering the product. Please
remove these sheets before use.
To detach the TV stand, perform the steps in reverse
order.
7
2/27/2010 17:23:15 2/27/2010 17:23:15