Audio; Adjust Audio Settings; Select A Digital Audio Language; Automatically Install Channels - Sharp LC-19DV200E Operation Manual

TV menu

Audio

Adjust Audio settings

This section describes how to adjust sound settings.
1.
Press TV MENU on the remote control and
select .
2.
Press OK or to enter the list.
Picture
Option
Lock
/
3.
Press to select one of the following
settings:
• Balance: Sets the balance of the left and right
speakers to best fit your listening position.
• Bass: Adjusts the amount of bass.
• Treble: Adjusts the amount of treble.
• Surround: Automatically switches the TV to
the best surround sound mode available from a
broadcast. Select On or Off.
• Equalizer: Change the characteristic of audio
frequency. Select the Off, Rock, Pop, Live,
Dance, Techno, Classic or Soft.
• Speaker ( 26"
output from speaker to "On" or "Off".
• Audio Description Setting:
output audio of Visual Impaired Audio. This
option is available, when the Audio Description
setting is "On" only. Press OK or
following options.
* Audio Description:
Impaired Audio. Visual Impaired Audio is
verbal narration inserted to explain detailed
scene in parallel with normal audio for people
with visual impairment.
* Volume: You can adjust the audio volume of
Visual Impaired audio.
• Reset: Select "Reset" to reset Balance, Bass,
Treble to the factory preset values.
/
4.
Press to select / adjust the item to the
desired level.
5.
Follow the on-screen instructions to exit.
14
54B0101A_English.indd 14 54B0101A_English.indd 14
0
50
50
Off
Off
On
32" ): You can set the audio
You can set the
to enter the
You can set the Visual
TV
The first time you set up your TV, you are prompted to
select an appropriate menu language and to perform
automatic installation of TV and digital radio channels
(If available).
This chapter provides instructions on how to reinstall
channels as well as other useful channel installation
features.
NOTE
• Re-installing channels modifies the channel list.

Select a digital audio language

1.
Press TV MENU on the remote control and
select .
2.
Press OK or to enter TV menu.
/
3.
Press to select Audio Language or
Audio Language 2nd.
4.
Highlight your selection and press
select an audio language.
5.
Follow the on-screen instructions to exit.
NOTE
• If your selected audio language is not broadcasted, the
default audio language will be displayed.

Automatically install channels

This section describes how to search and store
channels automatically. Instructions are for both digital
and analogue channels.
E
Step 1: Select your menu language
1.
Press TV MENU on your remote control and
≥ OSD Language.
select
/
2.
Press to select your language.
3.
Follow the on-screen instructions to exit.
/
to
3/2/2010 18:51:46 3/2/2010 18:51:46