Useful Adjustment Settings; Input Skip; Standby Mode; Language Setting - Sharp Aquos LC-32D50U Operation Manual

Useful adjustment settings

Input Skip

This setting allows you to skip the HDMI/DVI Input on
the Input Selection operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT 3,
4
INPUT 4 or INPUT 5) you wish to skip, and
then press ENTER.
Input 3 (HDMI)
Input 4 (HDMI)
Input 5 (DVI)
Press c / d to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6

Standby Mode

Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Standby Mode", and
3
then press ENTER.
Press a / b to select "Mode1" or "Mode2",
4
and then press ENTER.
Selected item
Mode1 Starting TV is quick from standby.
Mode2 Power consumption is small at the
standby.
Press MENU to exit.
5
44
Yes No
Description

Language setting

You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Language", and then
3
press ENTER.
Press a / b to select the desired language
4
listed on the screen, and then press ENTER.
Press MENU to exit.
5

Image position (AV input mode only)

For adjusting a picture's horizontal and vertical position.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Position", and then
3
press ENTER.
Press a / b to select "H-Pos." or "V-Pos.".
4
H-Pos. [ 0] a10
V-Pos. [ 0] a20
Reset
Selected item
H-Pos. Centers the image by moving it to the
left or right.
V-Pos. Centers the image by moving it up or
down.
Press c / d to adjust the item to the desired
5
position.
Press MENU to exit.
6
NOTE
• For resetting adjustments to the factory preset values,
press a / b to select "Reset", and then press ENTER.
• Adjustments are stored separately according to input
source.
b10
b20
Description