Zte MF23 User Manual page 23

MF23 User Manual
the only key in use at a given time. Whatever keys you enter for an access point, you must also enter the
same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match
WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter,
etc. Select Hex if use 10 or 26 hexadecimal numbers (0～9, a～f or A～F). Select ASCII if use 5 or 13
ASCII characters (case-sensitive).
If the Authentication type is WPA-PSK , WPA2-PSK or WPA-PSK/WPA2-PSK , the bottom part of
the configuration page displays WPA parameters.
WPA Algorithm: TKIP, AES or AUTO.
•
Pass phrase: You can input hexadecimal digits up to 64 characters or input ASCII characters choose a
•
length of 63 characters or less.
Key Renewal Interval: Define how long the key should be renew.
•
You can set Wireless MAC Filtering:
Wireless Disable: If disabled, MAC address is not used to control network access.
•
Wireless Allow: Set the MAC address that is allowed to access network.
•
Wireless Reject: Set the MAC address that is not allowed to access network.
•
Click Apply to confirm your configuration.
WPS
Select Wi-Fi Setting > WPS, the WPS configuration is shown in the following figure:
Select Enable,click Apply ,the WPS settings are shown in the following figure:
Confidential and Proprietary Information of ZTE CORPORATION 19