MF23 User Manual
Decline BA Request: Select to reject peer BA-Request or not.
•
Click Apply to confirm your configuration.
Notes:
The maximum number of Wi-Fi users is 5.
Advanced
Select Wi-Fi Setting > Advanced, the advanced wireless network parameters are shown in the following
figure:
Beacon Interval: The router broadcasts beacon message to announce that it has buffered frames to
•
deliver. The default value is 100 (ms).Beacons are packets sent by an access point to synchronize a
wireless network. Specify a beacon interval value. is recommended.
Data Beacon Rate(DTIM): A Delivery Traffic Indication Message(DTIM) informs next clients to listen
•
to broadcast and multicast messages.
Fragment Threshold: This value should remain at its default value of 2346. If you experience a high
•
packet error rate, you may slightly increase your fragment threshold. Setting the fragment threshold too
low may result in poor performance.
RTS Threshold: Request To Send (RTS) threshold should be remained as the value of 2347. If you
•
encounter inconsistent data flow, only minor modifications are recommended.
Confidential and Proprietary Information of ZTE CORPORATION 17