Teletext Function - Sharp Aquos LC-65GD1E Operation Manual

Useful features

Teletext function

What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your System receives Teletext signals broadcast by a
TV network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Teletext mode
Teletext is turned on/off with m on the remote control
unit. You can operate your System in Teletext mode
directly by inputting commands with the remote control
unit.
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
Press m again to display the Teletext on the
3
right screen and normal image on the left
screen.
• Each time you press m, the screen switches
as shown upper right.
• If you select a programme with no Teletext
signal, "No Teletext available." displays.
• The same message displays during dual
screen or other modes if no Teletext signal is
available.
68
DATA*
TELETEXT
* May appear in DTV input mode.
When viewing the Teletext information
• Press Pr to increase the page number.
• Press Ps to decrease the page number.
Button functions
Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in
the coloured brackets at the bottom of the screen by
pressing the corresponding Colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
TELETEXT
RED GREEN YELLOW BLUE
0 – 9:
Directly select any page from 100 to 899 by using 0 – 9.
f:
Each time you press f, the TELETEXT image switches
as shown below.
Full
Upper half
Lower half
k:
To reveal hidden information such as an answer to a
quiz, press k.
• Press k again to hide the information.
d:
To stop updating Teletext pages automatically, press d.
• Press d again to release the hold mode.
TELETEXT