Sharp Aquos LC-65GD1E Operation Manual page 10

Preparation
4
Attaching the clamp and bundling the cables with the clamp
5
Fasten the cables with
the holder.
* If routing the cables on
the right side, use the
holder on the right.
6
Closing the terminal cover
8
Fit the band around system cables.
1 Pass the end of the
band through the
hole.
Fix the system cables firmly to the Display as shown.
* If routing the cables on the right side, use the holder on the right.
Cable clamp
Insert the cable clamp in the hole on the Display as shown.
2 Pull the band
toward you and
fasten to the tab.
Cables come out from
the small opening.