Table of Contents
Advertisement
Part names
AVC System
Front view
Standby/On indicator
Power button
CARD indicator
RESET*
Headphone
(When connecting headphones, the sound from the speakers is muted.)
* Press RESET if the system cannot return to its original state after performing various operations.
This will reset the System as shown below.
• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
** Press SYSTEM RESET if the system does not operate after starting up.
NOTE
• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and PIN. See page 65 for resetting the PIN when you know it. See page
76 for initialising to the factory preset values when you forget your PIN.
Rear view
INPUT 3
(Y, P
Antenna Input
AV OUTPUT (VIDEO)
DIGITAL ANTENNA INPUT
DIGITAL ANTENNA OUTPUT
*Connect a digital audio equipment.
**Provided for command from PC (see page 72).
***The AVC System is shipped with a terminal cover on INPUT 5 terminal.
16
INPUT 4 (VIDEO)
INPUT 4 (S-VIDEO)
SYSTEM RESET**
(C
)
P
(C
))
B
B
,
R
R
INPUT 5 (AUDIO)
INPUT 1 (SCART)
INPUT 3 (SCART)
COMMON
INTERFACE slot
AV OUTPUT
(AUDIO)
INPUT 2 (SCART)
PC CARD slot
• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
RS-232C**
SPEAKER-B
INPUT 5 (DVI-I)***
DIGITAL AUDIO
DISPLAY OUTPUT 3
OUTPUT*
DC OUTPUT
CENTRE CHANNEL
INPUT
INPUT 4 (AUDIO L/R)
How to open the door.
DISPLAY OUTPUT 1
DISPLAY OUTPUT 2
AC INPUT
Advertisement
Table of Contents
