Making Cost-Effective Calls; Linking A Number With A Call-By-Call Number; Displaying Call Duration - Siemens Gigaset DL500A User Manual

Hide thumbs Also See for Gigaset DL500A:
Table of Contents

Advertisement

Making cost-effective
calls
Make phone calls through a network pro-
vider who offers cheap rates (call-by-call).
Linking a number with a
call-by-call number
You can store the codes (call-by-call num-
bers) from several network providers in the
local directory
(page
To prefix a number with a call-by-call
number ("linking"), when the base is in idle
status:
s
Press briefly to open the local
directory.
s
Select entry (call-by-call
number).
§Options§
Press the display key.
Display Number
Select and press
The call-by-call number is shown on the dis-
play.
~ c
Enter the number and pick up
the receiver.
Or:
s
Press briefly again to copy the
number from the local directory.
q
Select entry
q
If there are several numbers
stored in the entry:
Select the number and
§OK§
press
c
Pick up the receiver. Both num-
bers are dialled.
38).
§OK§
.
¢
(
page
39).
.

Making cost-effective calls

Displaying call duration

The duration of each call appears in the dis-
play for all external calls
u
During the conversation
u
Until approximately 3 seconds after
replacing the receiver.
Please note
The actual duration of the call can vary
from that shown by a few seconds.
47

Advertisement

Table of Contents
loading

Table of Contents