Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset S445 User Manual

Setting pauses

Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
v
Open menu.
5 4 O 1 L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec) and press
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open menu.
5 4 O 1 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause
(pause after access code)
Requirement: You have saved an access
code (page 56).
v
Open menu.
5 4 O 1 1
Press keys.
~
Enter a digit for the length
of the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
.
§OK§
.
§OK§
.
§OK§
Connecting the base station to the PABX
Switching temporarily to
tone dialling (DTMF)
If your PABX works with dial pulsing (DP),
but you need tone dialling for a call
(e.g. to listen to a T-Net box), you must
switch to tone dialling for the call.
Requirement: You are conducting a call
or have already dialled an external
number.
v
Open menu.
Tone Dialing
Select and press
Tone dialling is now activated
for this call only.
.
§OK§
57