Siemens Gigaset SL150 colour Instructions Manual page 60

Using the answering machine in the SL150 colour Base station
either ...
Ans. & Record
or ...
s
Announce Only
a
Setting alternate between answer and record and announce only
Example: You have set the answer and record mode. Now select the period during
which answer and record is to switch to announce only, e.g. from 6 p.m. to 8 a.m. In the
period from 8.01 a.m. to 5.59 p.m., the answering machine automatically switches
back to the answer and record mode you set.
Precondition: You have set the time (page 16).
¢ ¢
v æ
Announcements
~
s ~
s r
[RRRRRRRRRRRRRRRRRRRRR]
Save
If you have selected the 12-hour display, you can use display key
other half of the day.
Selecting a different announce mode or deleting the announce only
◆
message automatically deactivates the
If the memory is full in Ans. & Record mode, the answering machine
◆
will react as follows:
i
– if there is an announce only message (page 55), the answering
machine will automatically switch to Announce Only mode
– If there is no announcement, it switches itself off. Then delete the
old messages. The answering machine automatically returns to
the original mode when the old messages have been deleted.
With Answer and Record message:
Confirm (‰ = On).
OK
No Answer and Record message:
Select the menu item and confirm (‰ = On). Your
OK
selected announcement is saved even after the
answering machine is deactivated.
Long press (back to idle status).
¢
Set Ans. Mode
Entering and activating the time for "Ans Mode
Time":
In the From: line enter the start of the period, e.g.
Q N Q Q for 8.00 a.m.
Scroll to the Until: line and enter the end of the
period, e.g. 1 M Q Q for 5.00 p.m.
Scroll to the On/Off: line to activate the switch to
Announce Only (in so far as the announce mode-
Ans. & Record is activated or vice versa).
Now press the display key to confirm the entry.
¢
Ans Mode Time
am/pm
Ans Mode Time
to toggle to the
function.
57