28.10.05
i
Changing the ID, name and PIN of a mailbox
You can change the PIN by overwriting the current entry. You cannot change the name
of the general mailbox.
¢
v
è
Activated mailboxes are marked ‰.
either ...
s
R[RRRRRRRRRRRRRRRRRRRR]
Edit
~
R[RRRRRRRRRRRRRRRRRRRR]
Save
or ...
s
Mailbox 2
~
OK
s r
s r
s ~
[RRRRRRRRRRRRRRRRRRRRR]
Save
a
i
The message will not be delivered if the sender has used an invalid
◆
ID or the mailbox has been deactivated.
The message will go to your general mailbox if the sender has not
◆
entered the ID.
¢
¢
Settings
SMS Mailboxes
OK
The general mailbox cannot be PIN protected.
Changing the name of the mailbox:
Select the mailbox and press the display key.
Now enter the new name and press the display key
to store the entry.
Changing mailbox ID and PIN:
Select and confirm, e.g. Mailbox 2.
If required, enter the mailbox PIN and confirm.
Scroll to the ID: line and select a new ID.
Scroll to the Protection: line and activate or deacti-
vate PIN protection.
Scroll to the PIN line (you will see the current PIN)
and overwrite the PIN (4-digit).
Now press the display key to confirm the entry.
Long press (back to idle status).
SMS (Text Messages)
49