Siemens Gigaset SL150 colour Instructions Manual page 27

Using the directory and other lists
Transfer a directory or speed dial list to another handset
Precondition:
You can only transfer numbers if the receiving and sending handset are registered with
the same base station.
To do this:
1. Select the menu functions Copy Entry or Copy List.
2. Enter and confirm the internal number of the receiving handset.
– After an entry has been sent you are asked if you want to send another entry. If
you want to transfer more entries, confirm by pressing display key
– If you want to terminate transfer, confirm by pressing display key
3. The successful transfer of data is confirmed with a message and with the confirma-
tion tone at the receiving handset.
Note:
VIP settings, stored voice patterns and speed dial digits are not sent.
◆
Entries with identical telephone numbers are not overwritten during transfer. The
◆
number of entries that are stored in the receiving handset may therefore differ from
the number of entries that you have sent to it.
The transfer is cancelled if the phone rings or if the memory of the receiving handset
◆
is full. The last entry to be transferred appears in the display.
Adding a displayed telephone number to the directory
If a call number (CLIP) are shown in the display, you can transfer them to your directory.
This can be done while dialling from the last number redial list, from the calls list/
answering machine list(SL150 colour only) or during a call.
¢
v
Copy to Directory
s ~
either ...
à
Save Entry
or ...
s
[RRRRRRRRRRRRRRRRRRRRR]
Save
24
Scroll to the name line and enter the name.
Storing an entry:
Press the display key to open the menu.
Confirm. The entry is stored.
OK
Storing an anniversary:
Scroll to the Annivers.: line if you want to enter an
anniversary, as described on page 25. Now:
Press the display key to confirm the entry.
.
Yes
.
No