Selecting Recorder; Operating An Aquos Link Device; Listening With The Aquos Link-Compatible Audio System - Sharp AQUOS LC-42A65M Operation Manual

AQUOS LINK

Selecting recorder

You can select a recorder for the recording from
several connected recorders.
Repeat steps 1 to 3 in AQUOS LINK Auto
1
power on.
Press a/b to select "Selecting Recorder",
2
and then press ENTER.
Auto Power On
Selecting Recorder
Select the recorder, and then press ENTER.
3
Press MENU to exit.
4
NOTE
• If you have connected the AQUOS LINK-compatible audio
system between the TV and a CEC compatible-recorder,
the input source's indication changes from "INPUT1" to
"INPUT1 (Sub)" as it is shown below.
Auto Power On Selecting recorder for recording by [REC] button
Selecting Recorder
42
Selecting recorder for recording by [REC] button
INPUT1 [1. 0. 0. 0]
INPUT2 [2. 0. 0. 0]
INPUT1 [1. 0. 0. 0]
INPUT1 (Sub) [1. 1. 0. 0]
INPUT2 [2. 0. 0. 0]

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
Use the following procedure to start playback.
Press PLAY I to start playback of a title.
1
• See page 43, section "Playback of titles using
AQUOS LINK" if you want to start playback using
the list of the titles of the AQUOS BD Player.
Press FWD J to fast forward.
2
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
Use the following procedure to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in "Selecting Recorder".
After you selected recording media (HDD,
1
DVD, etc.) in the menu, please make sure the
recording menu in the ready condition.
Press REC E to record a programme.
2
Press REC STOP H to stop recording.
3
Listening with the AQUOS LINK-
compatible audio system
You can opt to listen to the TV sound only from the
AQUOS LINK-compatible audio system.
Open the remote control unit's fl ip cover.
1
Press OPTION and the AQUOS LINK menu
screen displays.
Press a/b to select "By AQUOS Audio SP",
2
and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS Audio SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS LINK-compatible audio system is audible.
• You can use VOL k/l and MUTE (e).