Table of Contents
Advertisement
•
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
Contents
Contents ���������������������������������������������������������������� 1
introduction ����������������������������������������������������������� 2
Dear SHARP customer ...................................... 2
Important Safety Precautions ............................. 2
Remote control unit ........................................... 3
TV (Front view) ................................................... 4
TV (Rear view) .................................................... 4
preparation������������������������������������������������������������ 5
Supplied accessories ......................................... 5
Mount the TV stand ........................................... 5
Wall mounting .................................................... 5
Installation of batteries ....................................... 6
Using the remote control ................................... 6
Quick guide ����������������������������������������������������������� 7
Initial installation overview .................................. 7
Watching tV ���������������������������������������������������������� 9
Daily operation ................................................... 9
Turning on/off the power .............................. 9
Changing channels ...................................... 9
Selecting external video source .................... 9
Operation without a remote control .............. 9
EPG (Electronic Programme Guide) ................. 10
Teletext ............................................................ 11
Select a Teletext language .......................... 11
tV menu �������������������������������������������������������������� 11
Picture ............................................................. 11
Adjust picture settings ................................ 11
Use smart picture....................................... 12
Sound.............................................................. 12
Adjust sound settings ................................ 12
Use Sound Mode ....................................... 13
TV .................................................................... 13
Select a digital audio language ................... 13
Automatically install channels ..................... 13
Update Scan ........................................ 14
Single RF Scan .................................... 14
Analogue Manual Scan ........................ 14
Favourite Network Select ..................... 15
Channel Skip........................................ 15
Channel Sort ........................................ 15
Channel Edit ........................................ 16
Assign a channel decoder (For ATV) ..... 16
Analogue Ch Fine Tune ........................ 16
Clean Channel List ............................... 16
Features .......................................................... 17
Select menu language ............................... 17
4:3 Mode ................................................... 17
Change picture format ............................... 17
Time .......................................................... 17
Change the time zone .......................... 17
Set the clock ....................................... 18
......................................................... 18
(Sleep timer) ...................................... 18
operation manual
Connecting a uSB device ������������������������������������ 22
Connecting external devices ������������������������������� 24
appendix ��������������������������������������������������������������� 27
SCART ........................................................ 18
Use subtitles ................................................ 18
Set analogue subtitles ............................ 18
channels ............................................. 18
Select Hearing impaired subtitle ............. 19
Teletext language ......................................... 19
Common Interface ....................................... 19
HDMI overscan ............................................ 19
Manual OAD Download ................................ 19
Reset Default ............................................... 19
DivX® Setup ................................................ 19
DivX® Registration (VOD) ....................... 19
DivX® Deactivation (VOD) ...................... 20
SW Ver. ........................................................ 20
Parental ............................................................. 20
Access Parental menu ................................. 20
Lock one or more channels .......................... 20
Set the time interval lock .............................. 20
To set parental ratings .................................. 20
Lock one or more connected devices .......... 21
Set / Change password ............................... 21
Clear all parental settings ............................. 21
Eco .................................................................... 21
USB function ..................................................... 22
Basic Operation ..................................... 22
View Photos ........................................... 22
Listen to Music ....................................... 23
Play Videos ............................................ 23
USB device compatibility ................................... 23
HDMI connection ............................................... 24
YPbPr (Component connection)......................... 24
SCART connection ............................................ 24
Speaker / Amplifier connection .......................... 25
Inserting the Smartcard into the CA module ....... 25
Checking CA module information ................. 25
Connecting a PC ............................................... 26
Digital connection ........................................ 26
Analogue connection ................................... 26
Supported display resolutions ...................... 26
Troubleshooting ................................................. 27
Specification ...................................................... 28
Environmental specifications .............................. 30
Other information ............................................... 30
Trademarks ........................................................ 31
enGliSH
1
Advertisement
Table of Contents
Related Manuals for Sharp LC-32LE320E
Summary of Contents for Sharp LC-32LE320E
-
Page 1: Table Of Contents
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Contents Contents ���������������������������������������������������������������� 1 introduction ����������������������������������������������������������� 2 Dear SHARP customer ... 2 Important Safety Precautions ... 2 Remote control unit ... 3 TV (Front view) ... 4 TV (Rear view) ... 4 preparation������������������������������������������������������������... -
Page 2: Introduction
Dear SHarp customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. important Safety precautions •... -
Page 3: Remote Control Unit
introduction remote control unit (poWer) Press to turn the LCD TV on or enter standby mode. b (input SourCe) Select an input source. 0-9 DiGit ButtonS To select a TV channel directly. Press this button to display electronic programme guide when watching digital channels. -
Page 4: Tv (Front View)
introduction tV (Front view) tV (rear view) HDMI 1 RS-232C IOIOI Programme (Channel) buttons Volume buttons MENU button INPUT SOURCE button POWER button HDMI 1 HDMI 2 (On) indicator PC IN (VGA / AUDIO) SCART (CVBS Tuner out) AV VIDEO and L/R Audio Output COMPONENT (VIDEO SPDIF OUT and L/R AUDIO INPUT) -
Page 5: Preparation
preparation Supplied accessories Stand unit and screws AC cord (x1) Remote control (×1) Product shape varies AAA battery (×2) in some countries Operation Manual Quick Setup Guide Operation Manual Quick Setup Guide mount the tV stand 1� Put the TV face down on a safe surface that is covered by a soft and smooth cloth. -
Page 6: Installation Of Batteries
preparation installation of batteries 1� Insert two AAA batteries into Remote control. Make sure (k) and (l) are facing the proper direction. 2� Replace the cover. note • If the remote control will not to be used for a long time, remove the batteries to avoid remote control damage. -
Page 7: Quick Guide
Quick guide initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. preparation Œ Connect antenna cable to the antenna terminal. 75Ω... -
Page 8: Channel Scan
Quick guide 3� mode select (tV location setting) Initial Setup Mode select Please select your mode HOME SHOP Back Select Next When selecting Home mode, go to step 4 to select the scan mode. When selecting SHop mode, a window pops out to ask your confirmation. -
Page 9: Watching Tv
Watching tV Daily operation turning on/off the power Press on the TV. Switch it off by pressing on the TV. Changing channels With p<>: Standby mode to standby mode If the TV set is switched on, you can switch it to standby by pressing B on the remote control. -
Page 10: Epg (Electronic Programme Guide)
Watching tV epG (electronic programme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day”... -
Page 11: Teletext
Watching tV teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. -
Page 12: Use Smart Picture
tV menu 2� Press oK or ≥ to enter the list. Menu Picture Smart Picture Brightness Sound Contrast Colour Tint Features Sharpness Parental Colour Temperature Advanced Control Select Enter 3� Press o> to select one of the following settings: • Brightness: Changes the level of light in the picture. -
Page 13: Use Sound Mode
tV menu 3� Press <> to select one of the following settings: • equalizer 120Hz (Bass): Adjusts the amount of bass. • equalizer 500Hz (tenor): Adjusts the amount of tenor. equalizer 1�5KHz (neutral): • amount of neutral. equalizer 5KHz (treble): •... -
Page 14: Update Scan
tV menu Step 3: automatic channel scan Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. 1� menu on the remote control and select Press tV ≥ Channels� note •... -
Page 15: Favourite Network Select
tV menu 2� Press <> to select analogue manual Scan and press oK or ≥ to enter. Menu Picture Search for analogue channels Sound Features Start Frequency (MHz) Parental Scan Up Scan Down EXIT Back 3� Start Frequency (mHz) box, enter the In the frequency by using the digit buttons on the remote control. -
Page 16: Channel Edit
tV menu Channel edit Channel edit allows you to change the channel number or the channel name. 1� Press menu on the remote control and select tV ≥ Channels� note • You are prompted to enter current password to enter Channels if Channel Block /parental Guidance / input Block in the parental menu is not the default setting. -
Page 17: Features
tV menu Features Select menu language Select the menu display language. 1� Press menu on your remote control and select Features ≥ menu language. 2� Press ≤≥ to select your language. 3� Follow the on-screen instructions to exit. 4:3 mode Select aspect ratio behavior for Auto mode. -
Page 18: Set The Clock
tV menu Set the clock 1� Press menu on the remote control and select Features ≥ time. 2� Press oK or ≥ to enter time menu. 3� Press <> to select time and press oK or ≥ to enter. Menu Picture Auto Synchronization Sound... -
Page 19: Select Hearing Impaired Subtitle
tV menu 1� Press menu on the remote control and select Features > Subtitle� 2� Press oK or ≥ to enter Subtitle. 3� <> to select 1st Subtitle or 2nd Press Subtitle. 4� Highlight your selection and press a subtitle language. 5�... -
Page 20: Divx® Deactivation (Vod)
tV menu DivX® Deactivation (VoD) You can find your deactivation code on this menu. You need to deactivate the TV at www.divx.com to release the registration. 1� menu on the remote control and select Press Features ≥ DivX® Deactivation. 2� oK or ≥... -
Page 21: Lock One Or More Connected Devices
tV menu lock one or more connected devices Disable the specific external input signals. 1� Enter your password to access the menu. 2� <> to select input Block and press oK Press or ≥ to enter the input source list 3�... -
Page 22: Connecting A Usb Device
Connecting a uSB device uSB function This TV is equipped with a USB connector that enables you to view photos, listen to music, and play videos stored on a USB storage device. note • Depending on the USB device, the TV may not be able to recognise the contained data. -
Page 23: Listen To Music
Connecting a uSB device Buttons Descriptions G button Select the slide show duration. Y button Select the slide show transition effect. eXit Return to the previous operation. listen to music 1� In the music thumbnail browser, press <>≤≥ to select a music file or a music album. 2�... -
Page 24: Connecting External Devices
Connecting external devices Before connecting ��� • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. -
Page 25: Speaker / Amplifier Connection
Connecting external devices example of connectable devices E VCR E DVD recorder When using the SCart 2 Half SCART, which transmits S-Video or CVBS in, and CVBS monitor out. VCD / DVD recorder note • In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input source. -
Page 26: Connecting A Pc
Connecting external devices Connecting a pC Digital connection HDMI cable HDMI DVI-HDMI cable Ø 3.5 mm stereo mini jack cable analogue connection Ø 3.5 mm stereo mini jack cable RGB cable DVI-I / RGB conversion cable DVI-I Ø 3.5 mm stereo mini jack cable Supported display resolutions Computer formats (pC) Resolution... -
Page 27: Appendix
appendix troubleshooting problem No picture Abnormal colours Twisted picture Picture too dark Audio only, no images Picture only, no audio Cannot use remote control Cannot receive sufficient channels through antenna No colour Blinking picture accompanied by ghost image Broken lines or segments Certain TV channels are blocked (Hope to acquire some channels) Overlapping images or ghost images... -
Page 28: Specification
appendix Specification item LCD screen size Number of dots Video Colour System Analogue TV-Standard Digital VHF/UHF Receiving Function Channel CATV TV-Tuning System STEREO/BILINGUAL Audio amplifier Speaker Antenna RS-232C SCART PC IN Rear Component SPDIF OUT AV OUT HDMI 1 C. I. (Common Interface) AV IN Side Headphones... - Page 29 Operating temperature • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
-
Page 30: Environmental Specifications
appendix environmental specifications item *1 on-mode (W) Standard *2 energy-Save-mode (W) ≥ *3 Standby-mode (W) *4 off mode (W) Power button *5 annual energy Consumption (kWh) *6 annual energy Consumption (kWh) ≥ (energy-Save-mode) *1 Measured according to IEC 62087 Ed. 2 *2 For further information about the Energy Save function, please see related pages in this operation manual *3 Measured according to IEC 62301 Ed. -
Page 31: Trademarks
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. - Page 32 If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling.