Auto Power On; Selecting Recorder; Using Genre Info; Operating An Aquos Link Device - Sharp AQUOS LC-32D77X Operation Manual

AQUOS LINK

Auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Auto power on", and
2
then press ENTER.
AQUOS LINK control
Auto power on

Selecting recorder

Using genre info.

Press c / d to select "On", and then press
3
ENTER.
Press MENU to exit.
4
NOTE
• The factory default for this item is "Off".
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Selecting recorder", and
2
then press ENTER.
AQUOS LINK control
Auto power on
Selecting recorder
Using genre info.
Select the recorder, and then press ENTER.
3
Press MENU to exit.
4
NOTE
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external
'
source s indication changes (e.g. from "INPUT 1" to
"INPUT 1 (Sub)").
AQUOS LINK control
Auto power on
Selecting recorder
Using genre info.
52D77X.indb 51 52D77X.indb 51
Setting auto power on by AQUOS LINK
On Off
Selecting recorder for recording
by [REC] button
Input Location
INPUT1 [1. 0. 0. 0]
INPUT2 [2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
Input Location
INPUT1 [1. 0. 0. 0]
INPUT1 (Sub) [1. 1. 0. 0]
INPUT2 [2. 0. 0. 0]
Using genre info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included in the digital broadcast.
Repeat steps 1 to 3 in AQUOS LINK control.
1
Press a / b to select "Using genre info.", and
2
then press ENTER.
Press c / d to select "On", and then press
3
ENTER.

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Open the remote control unit's fl ip cover.
1
Press PLAY I to start playback of a title.
2
• See page 52, section "Playback of titles using
AQUOS LINK" if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
Press FWD J to fast forward.
3
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
Listening with the AQUOS AUDIO speaker
system
You can choose to listen to the TV sound only from
the AQUOS AUDIO speaker system.
Open the remote control unit's fl ip cover, and
1
then press OPTION.
Press a / b to select "By AQUOS AUDIO SP",
2
and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top menu/Title list
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS AUDIO speaker system is audible.
51
2/17/09 5:13:40 PM 2/17/09 5:13:40 PM