Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• In such case, you have to set the correct signal manually.
After setting once, it will display when the same signal
(resolution) is input again.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "Input signal" and then
3
press ENTER.
Press a/b to select the desired input signal
4
on the display.
NOTE
• You can only select the "Input signal" on the Setup menu
only when there is a necessity to set it manually.
52D77X_en_f.indd 57
52D77X_en_f.indd 57
57
2/18/09 10:50:21 AM
2/18/09 10:50:21 AM